Unifizz HS5157 2pcs Hydraulic Steering Bleed Kit,Boat Bleed Kit Filler Tube with Brass Swivel Compatible with Seastar Hydraulic Steering for Outboard Inboard Sterndrive Hydraulic Helms Marine Tool Kit

Specification: Material: Polyurethane, Stainless Steel Color: Gold Tone, Clear Bridge Tube Inner Dia. :9mm/0.35 inch Bridge Tube Length: 47.5cm/18.7 inch Bridge Tube Outer Dia. : 10mm/0.39 inch Filler Hose Thread Size: 1/4 NPT Filler Hose Hole Dia. : 8mm/0.31 inch Filler Hose Length: 44cm/17.32 inch Filler Hose with Screw Cap Dia.: 26mm/1.02 inch Filler Hose with Screw Cap Outer Dia. : 12mm/0.47 inchFitment:Fit for Seastar inboard, outboard hydraulic steering systems. Used for refilling your boat's steering system fluid.Basic Instructions: 1. Attach bottle to helm reservoir (do not pierce bottle)(do not let bottle run empty). 2. Connect bridge tube to fittings on steering cylinder and loosen fittings. 3. Use helm to pump fluid through system by turning the wheel in one direction. Air bubbles will be pushed to the reservoir at the helm. 4. Manually swing the outboard through full articulation to relieve trapped air. 5. Note: Orientating fittings up while pumping fluid with helm will allow air to escape cylinder. 6. Repeat 3-4 times necessary until no air is visible in bridge tube. 7. Tighten fittings before removing bridge tube.Package Included: 1 x Bridge Tube 1 x Filler Hose with Screw Cap (With 11/20 inch straight pipe thread fitting)

• Enhanced Durability: The upgraded high-quality metal pipe fittings and PVC pipes ensure excellent oxidation resistance, corrosion resistance, and long-lasting durability, preventing rusting and improving the product's service life.
• Leak-proof Design: The threaded brass fittings guarantee a leak-proof performance, providing a sealed and professional steering system during the deflation process. Customers can rely on its efficiency and reliability.
• Easy Installation: This hydraulic steering filler kit is designed for convenient installation. It can be disassembled and installed at the bottle mouth, ensuring easy access and facilitating the nozzle positioning.
• Effective Fluid Pumping: The discharge fitting can be positioned upward when pumping fluid with the rudder pump. This design allows air to escape from the cylinder, ensuring efficient and effective fluid pumping.
• Reliable Bleeding Process: The installation instructions guide users to attach the bottle to the helm reservoir, connect the bridge tube to bleed fittings on the steering cylinder, and use the helm to pump fluid through the system. The process helps push air bubbles to the reservoir and relieve trapped air by manually swinging the outboard through full articulation.